Application fields
Rack mounted electronics such as networking and communications equipment, industrial computers, sound and studio systems, laboratory instruments and industrial control systems.
M6119235
COMBIMET T 19" 2Ux365mm Open Top
Modern open top 19" rack case in aluminium with an anodised front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 2Ux365mm Open Top
product added to your basket
Aluminium
Light grey RAL 7035
88.1x482.6x365mm
M6119239
COMBIMET T 19" 2Ux365mm Open Top
Modern open top 19" rack case in aluminium with an anodised front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 2Ux365mm Open Top
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x365mm
M6119335
COMBIMET T 19" 3Ux365mm Open Top
Modern open top 19" rack case in aluminium with an anodised front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 3Ux365mm Open Top
product added to your basket
Aluminium
Light grey RAL 7035
132.5x482.6x365mm
M6119339
COMBIMET T 19" 3Ux365mm Open Top
Modern open top 19" rack case in aluminium with an anodised front panel and two ergonomic front panel handles. The ventilated one-piece case body has angled side panels and a short rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Open Top
Supply
19" front panel, ventilated case body, 2 handle extrusions, M4 x 10 mm (x4), M3 x 8mm (x1). Supplied fully assembled.
Close
COMBIMET T 19" 3Ux365mm Open Top
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x365mm
M6219115
COMBIMET 19" 1Ux265mm Solid Top
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm Solid Top
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x265mm
M6219119
COMBIMET 19" 1Ux265mm Solid Top
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm Solid Top
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x265mm
M6219125
COMBIMET 19" 1Ux365mm Solid Top
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm Solid Top
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x365mm
M6219129
COMBIMET 19" 1Ux365mm Solid Top
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of a solid wrap around top cover with removable base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Unventilated, solid top cover
Supply
19" front panel, top cover, base panel, rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm Solid Top
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x365mm
M6219135
COMBIMET 19" 1Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x265mm
M6219139
COMBIMET 19" 1Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x265mm
M6219145
COMBIMET 19" 1Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x265mm
M6219149
COMBIMET 19" 1Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x265mm
M6219155
COMBIMET 19" 1Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x365mm
M6219159
COMBIMET 19" 1Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x365mm
M6219165
COMBIMET 19" 1Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
43.6x482.6x365mm
M6219169
COMBIMET 19" 1Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, rear panel, 2 handle extrusions, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x365mm
M6219179
COMBIMET 19" 1Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux610mm
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x609.6mm
M6219189
COMBIMET 19" 1Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 1Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
43.6x482.6x609.6mm
M6219235
COMBIMET 19" 2Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
88.1x482.6x265mm
M6219239
COMBIMET 19" 2Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux265mm
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x265mm
M6219245
COMBIMET 19" 2Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
88.1x482.6x265mm
M6219249
COMBIMET 19" 2Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x265mm
M6219255
COMBIMET 19" 2Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
88.1x482.6x365mm
M6219259
COMBIMET 19" 2Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux365mm
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x365mm
M6219265
COMBIMET 19" 2Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
88.1x482.6x365mm
M6219269
COMBIMET 19" 2Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x365mm
M6219279
COMBIMET 19" 2Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux610mm
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x609.6mm
M6219289
COMBIMET 19" 2Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 2Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
88.1x482.6x609.6mm
M6219335
COMBIMET 19" 3Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
132.5x482.6x265mm
M6219339
COMBIMET 19" 3Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux265mm
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x265mm
M6219345
COMBIMET 19" 3Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
132.5x482.6x265mm
M6219349
COMBIMET 19" 3Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x265mm
M6219355
COMBIMET 19" 3Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
132.5x482.6x365mm
M6219359
COMBIMET 19" 3Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux365mm
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x365mm
M6219365
COMBIMET 19" 3Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
132.5x482.6x365mm
M6219369
COMBIMET 19" 3Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x365mm
M6219379
COMBIMET 19" 3Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux610mm
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x609.6mm
M6219389
COMBIMET 19" 3Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 3Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
132.5x482.6x609.6mm
M6219435
COMBIMET 19" 4Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
177x482.6x265mm
M6219439
COMBIMET 19" 4Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux265mm
product added to your basket
Aluminium
Black RAL 9005
177x482.6x265mm
M6219445
COMBIMET 19" 4Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
177x482.6x265mm
M6219449
COMBIMET 19" 4Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
177x482.6x265mm
M6219455
COMBIMET 19" 4Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
177x482.6x365mm
M6219459
COMBIMET 19" 4Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux365mm
product added to your basket
Aluminium
Black RAL 9005
177x482.6x365mm
M6219465
COMBIMET 19" 4Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
177x482.6x365mm
M6219469
COMBIMET 19" 4Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
177x482.6x365mm
M6219479
COMBIMET 19" 4Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux610mm
product added to your basket
Aluminium
Black RAL 9005
177x482.6x609.6mm
M6219489
COMBIMET 19" 4Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 4Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
177x482.6x609.6mm
M6219535
COMBIMET 19" 5Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
221x482.6x265mm
M6219539
COMBIMET 19" 5Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux265mm
product added to your basket
Aluminium
Black RAL 9005
221x482.6x265mm
M6219545
COMBIMET 19" 5Ux265mm Vented
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
221x482.6x265mm
M6219549
COMBIMET 19" 5Ux265mm Vented
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
221x482.6x265mm
M6219555
COMBIMET 19" 5Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
221x482.6x365mm
M6219559
COMBIMET 19" 5Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux365mm
product added to your basket
Aluminium
Black RAL 9005
221x482.6x365mm
M6219565
COMBIMET 19" 5Ux365mm Vented
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
221x482.6x365mm
M6219569
COMBIMET 19" 5Ux365mm Vented
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x4), M3 x 8 mm (x14), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
221x482.6x365mm
M6219579
COMBIMET 19" 5Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux610mm
product added to your basket
Aluminium
Black RAL 9005
221x482.6x609.6mm
M6219589
COMBIMET 19" 5Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x4), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 5Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
221x482.6x609.6mm
M6219635
COMBIMET 19" 6Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux265mm
product added to your basket
Aluminium
Light grey RAL 7035
266x482.6x265mm
M6219639
COMBIMET 19" 6Ux265mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux265mm
product added to your basket
Aluminium
Black RAL 9005
266x482.6x265mm
M6219645
COMBIMET 19" 6Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux265mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
266x482.6x265mm
M6219649
COMBIMET 19" 6Ux265mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux265mm Vented
product added to your basket
Aluminium
Black RAL 9005
266x482.6x265mm
M6219655
COMBIMET 19" 6Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux365mm
product added to your basket
Aluminium
Light grey RAL 7035
266x482.6x365mm
M6219659
COMBIMET 19" 6Ux365mm
Modern aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux365mm
product added to your basket
Aluminium
Black RAL 9005
266x482.6x365mm
M6219665
COMBIMET 19" 6Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux365mm Vented
product added to your basket
Aluminium
Light grey RAL 7035
266x482.6x365mm
M6219669
COMBIMET 19" 6Ux365mm Vented
Modern ventilated aluminium 19" rack case with an anodised front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, 2 side panels, 2 handle extrusions, rear panel, M4 x 16 mm (x6), M3 x 8 mm (x14), M3 x 8 mm (x6).. Supplied fully assembled.
Close
COMBIMET 19" 6Ux365mm Vented
product added to your basket
Aluminium
Black RAL 9005
266x482.6x365mm
M6219679
COMBIMET 19" 6Ux610mm
Modern aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
Without ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 6Ux610mm
product added to your basket
Aluminium
Black RAL 9005
266x482.6x609.6mm
M6219689
COMBIMET 19" 6Ux610mm Vented
Modern ventilated aluminium 19" rack case, 24" deep, with a painted black front panel and two ergonomic front panel handles. The case body consists of two side panels with removable top, base and rear panel. The base is pre-punched for fitting PCB mounting pillars or the accessory internal mounting plate. All parts are provided with M4 earth studs for electrical continuity.
Version
With ventilation
Supply
19" front panel, top panel, base panel, side panel (x2), rear panel, handle extrusion (x2), M4 x 16 mm (x6), M3 x 8 mm (x22), M3 x 8 mm (x6). Supplied fully assembled.
Close
COMBIMET 19" 6Ux610mm Vented
product added to your basket
Aluminium
Black RAL 9005
266x482.6x609.6mm
M5600001
PCB mounting kit
Kit of ten M3 plastic PCB mounting pillars which can be positioned anywhere in the enclosure. Pillar height 10 mm. Fits to Ø3.2 mm hole in the case panel. Supplied with M3 fixing screws to secure to base panel.
If PCB or mounting plate fixing screws are required please see our screw kit
M5600010.
Supply
10 Nylon PCB pillars and 10 M3 x 6 mm countersink fixing screws.
Close
PCB mounting kit
product added to your basket
PA 6
Black RAL 9005
M5600010
PCB/Panel Fixing Screws, M3
Pack of 100 M3 x 6 mm pan head pozi drive screws. Used for fitting PCBs and mounting plates to the threaded standoffs in our standard enclosures: TECHNOMET, MINIMET
Also suitable for use in combination with M5600001 PCB Mounting Kit, to secure PCBs to the plastic mounting pillars. Fixing points are provided in the following enclosures for this kit: COMBIMET 19", VERSAMET 19", UNIMET 19", UNIDESK, UNIMET, UNIMET-PLUS, DATAMET
These screws can also be used to replace the standard slotted case assembly screws supplied with our UNICASE enclosures — if pozi drive screws are preferred.
Additionally, this screw pack may be useful if your enclosure has been customised with M3 threaded inserts and pillars.
Supply
100 M3 x 6 mm pan head fixing screws (pozi drive PZ1).
Close
PCB/Panel Fixing Screws, M3
product added to your basket
Steel
Zinc coated
6mm
M5900016
19" mounting kit
Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.
Supply
M6 caged nuts (x4), M6 x 16 mm silver screw (x4) and black plastic cup washer (x4).
Close
19" mounting kit
product added to your basket
Black RAL 9005
M5900018
19" mounting kit black screws
Mounting kit for fitting a 19" rack case, subrack or front panel into a rack. Black screws and black cup washers.
Supply
M6 caged nuts (x4), M6 x 16 mm black screw (x4) and black plastic cup washer (x4).
Close
19" mounting kit black screws
product added to your basket
Black RAL 9005
M6000035
19" mounting kit
Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.
Supply
M6 caged nuts (x4), M6 x 16 mm screw (x4) and light grey plastic cup washer (x4).
Close
19" mounting kit
product added to your basket
Light grey RAL 7035
M6200265
Mounting plate (265mm)
Internal mounting plate kit for COMBIMET 19" rack cases 265 mm deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (265mm)
product added to your basket
Aluminium
Natural finish
335x230x1.5mm
M6200365
Mounting plate (365mm)
Internal mounting plate kit for COMBIMET 19" rack cases 365 mm deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (365mm)
product added to your basket
Aluminium
Natural finish
335x330x1.5mm
M6200610
Mounting plate (24")
Internal mounting plate kit for COMBIMET 19" rack cases 24" deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.
Supply
Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).
Close
Mounting plate (24")
product added to your basket
Aluminium
Natural finish
335x574.6x1.5mm
19" Enclosures
Metal Enclosures Modern metal enclosures for OEM electronics equipment
Accessories for Enclosures Extensive range of universal accessories
Accessories for 19" Racks Universal accessories for 19" equipment
Modifications & Finishing All the customising services you need
Bespoke Enclosures Bespoke metal enclosures and sheet metal parts
News
Blog
Specifying Customised Enclosures
ROHS / WEEE Directives
Discontinued Products
Privacy Policy - GDPR (EU) 2016/679
Cookie Policy
General Enquiries Form
How To Find Us
Worldwide Sales Network
